Smena 35 Viewfinder Film Camera

Smena 35 Viewfinder Film Camera

Smena 35 Viewfinder Film Camera

'Film Camera Review - A quick look at the all manual old school Smena 35, a chic, fun and easy to use 35mm viewfinder film camera'


Introduction and Overview

One of the chicest and the cutest of all compact 35mm film camera in my collection is undoubtfully the all plastic bodied LOMO Smena 35, the latest model of the Smena viewfinder camera series. A product of the LOMO factory in Leningrad (now St. Petersburg), Russia, the Smena 35 is an update of the popular Smena 8M.

Smena 35, Front right
Over the period of its production from 1990 to 1993, the Smena 35 was produced in various colored plastic bodies with the front and back plate in black, white, red, yellow, titanium grey, and blue.

The front plate of the Smena 35 is adorned with a feature line emphasizing the 'Smena' logo across the top plate. The color of this line varies from yellow, green, white, orange, and blue.

The lens faceplate comes either in white, black or one that matches the body color of the camera.

White the Smena logo may appear in white, grey or black, the '35' model designation is based on the colors of the feature line. The plastic tip of the leaf shutter lever and hot shoe cover is normally seen in red.

Smena 35

This is just a quick overlook of a cool little camera I bought for cheap money. Simple and straight forward in its design, I like it and look forward to trying it.
Technically, the all-mechanical Smena 35 is similar in its basic construction to the Smena 8M. It has the same plain tunnel viewfinder as the Smena 8M, the multi-coated three-element Anastigmat T-43 lens with aperture setting from F4 to F16, and shutter speeds setting from 1/15 to 1/250 second as well as B.


Basic Camera Features

Everything you do on the camera is manual, be it loading or unloading the film, setting the ISO film equivalent, advancing the film frame, doing the mental on the Sunny 16 rule for aperture and shutter speed setting, actuating the leaf shutter, and releasing the shutter itself.

Smena 35, Front left

The Smena 35 runs without a battery, the camera does not come with a self-timer, and the dial for film ISO speed setting is just a guide you may refer to for setting the exposure. The strength of the camera rests reputedly on the very sharp and competent multi-coated  40mm Anastigmat T-43 lens, a 3-element in 3-group design.

The lens mount and its housing are central to the control and functions of the camera. At the front end is the ribbed focusing ring with focal distance settings both in graphic icons at 1, 1.5, 5, and 10 meters and corresponding metric distance measurement.

Smena 35, Front

Sorrounding the front element of the lens is the aperture control ring, indented with two colored marks, the lower indicating the aperture opening, and the upper indicating the film ISO speed you are setting the camera to.

Located behind the focusing ring is the shutter speed ring which will adjust the leaf-spring shutter for Sunny 16 lighting ambiance, or shutter speeds from B, 1/15 to 1/250 second.

Adjusting the weather icon from Full Sun, Partial Sun, Partial Cloud, Full Cloud, and Rain Cloud will correspondingly change the shutter speed setting form 1/250 second down to 1/30 second. Nudge the pointer beyond the Rain Cloud setting and the shutter speed will go into B(ulb) mode.

The shutter is actuated by pulling the red tab back over the apex of the housing until it clicks into position. You are now ready to take the shot. Press the shutter release button and you are off.

Smena 35, Top

Other than that the top plate of the camera is otherwise simple and uncluttered. Besides the film rewind crank and the shutter button which also functions as the rewind release knob, there is the hot shoe.

Please Note!

A feature not available on the Smena 8M, the Smena 35 requires the shutter release button to be pressed and locked to the 'R' position to disengage the film forward gear before you can rewind the film back into its canister.

On the Smena 8M, all you have to do is to press and hold the shutter button while you rewind the film back into its canister.

The film rewind crank on the Smena 35 has to be pulled up from its rest position to enable you to insert or remove the film canister in the film box. This also requires you to press and hold the shutter button while you pull up the rewind knob with a jiggle or a small turn.

Smena 35, Back

On the back of the top plate, from left to right, are the viewfinder window, film frame counter, and film forward thumb crank. The film back has a sculptured thumb rest feature. Set the film counter to frame '1' by turning the numbered wheel from left to right only after you have loaded the film and done the two blank shots.

Smena 35, Bottom

The Smena 35 has only the tripod socket on the bottom plate.

Smena 35, Film box

The film box is standard as per most film cameras. Slit the end of the film tab into the vertical slit of the take-up spool and make sure the film is tensioned flat across the film frame and the perforations are fully engaged with the take-up spool tooth before closing the back to do the two blank shots.


Viewfinder Readout

The viewfinder readout of the Smena 35 is a plain glass 1:1 tunnel view of the image you are framing. The view, however, may be slightly blocked by the red tip of the shutter lever, a clever idea to indicate that the shutter has not been cocked.

Smena 35, Pair

Using the Camera

The basic approach to having fun with the camera is in understanding how to set the camera for use. It is very simple, really - set the aperture of the lens based on the film ISO speed you use, adjust the shutter speed to the ambient lighting condition and you are never far off from getting the perfect exposure.

A more adventurous option is to work around the camera's aperture setting for more creative effects. You can, for example, use a large aperture (F4) for a close-up image to get a more blurry background, or the opposite for the all-in-focus shot of the landscape.

Just remind yourself that for each step that you enlarge the aperture (say, from F5.6 to F4), you should also increase the shutter speed (from 1/30 to 1/60) to compensate for the increased light, and vice versa.


Multiple Exposures

No worries at all on the Smena 35. Just cock and release the shutter again, and again, after each shot, until you are ready to move on to the next film frame.


Parting Shot

Again, loading and unloading the film roll, and rewinding the film back into its canister is an advanced feature on this camera, and need the care, knowledge, and technique to be done properly. Have fun!


Shop Now: Film Camera Sale by ImagingPixel

Follow ImagingPixel on Facebook, Pinterest, Twitter

No comments:

Post a Comment

Popular on ImagingPixel